Duplex Hand Grip

Designed to carry or pull any object that will fit into its jaws

Grips and releases automatically


SAC (Screw-Adjusted Cam) Plate Clamps

Recommended for turning plates from horizontal to vertical as well as through a 180° arc

The convex, serrated cam swivels on a ball joint so that the area of cam engagement increases as load increases

Drop forged body and shackle

100% proof tested with certificate of test attached to each clamp

Note: Screw needs to be hand tight only! Do not overtighten


"GX" Clamps

"GX" Clamp is entirely drop forged and heat-treated

Can be used for both vertical and horizontal-to-vertical lifting

Exclusive feature is a patented wear indicator system. When any of cam's straight line, convex teeth are flattened between unique wear indicator grooves, it is time to change the cam

Shackle and "G" link combined into one part for fewer stress points and less chance of side loading damage

Note: The pad should be replaced same time as cam

100% proof tested with certificate of test attached to each clamp


Model "GX" Rubber Pad (Non-Marring) Clamps

Has a rubber covered pad and cam of relatively smooth metal conditioned to grip tightly

Should be used to lift plates with a hardness over 43 Rockwell C/400 Brinnell

Lifts heavy plates with minimum marring

100% proof tested with certificate of test attached to each clamp


Drum Handling Equipment
Single Drum Lifter, No. 52

Lifts drums with or without heads removed

Drums can be lifted from either horizontal or vertical positions and then reversed

Snaps onto drum and is held there by its spring-loaded cam even when there is no load

Note: This clamp is not suitable for lifting plates or sheets